Medion MD 43590 Manual Del Usuario página 14

Operation
4
3. Line up the paper with the desired mounting location and mark (with a
pencil) on the wall the positions of the mounting holes
Make sure the mounting holes are marked horizontally.
4. Using an electric drill
5
18
5. Insert the wall anchors
into the wall anchors using a Philips screwdriver
Leave no more than 0.2 inches (5 mm) between the heads of the screws and
the wall (see Fig. 5). This minimizes the inclination angle of the product.
6. Mount the product on the wall by guiding the heads of the screws into the
mounting holes
Operation
• Make sure all desired cable connections and the power
• The indicator light
14
32 , drill holes in the wall at the marked locations.
18 into the drilled holes and drive the screws
6 .
connection are properly made before operation (see chapter
"Audio connections" and "Power connection").
when a button is pressed. Make sure there is no obstruction
between the product and the remote control during use. The
maximum distance between the two parts should not be
greater than 33 feet (10 meters).
19
31
of the remote control
6 (see Fig. 4).
0.2 in (5 mm)
33 (see Fig. 5).
21
blinks once
19