Publicidad
Step 9
First, fi ll the hole in the BRACE (G) 1/4 to 1/2 full with
å
GLUE (54M). Then, insert the WOOD DOWEL (15F) into
the hole. Wipe away the excess GLUE.
Fasten the BRACE (G) to the RIGHT END (A2). Use a
å
BLACK 1-15/16" FLAT HEAD SCREW (113S).
Fasten the BRACE (G) to the STRETCHER (H). Use a
å
TIE PLATE (3G) and two BLACK 9/16" LARGE HEAD
SCREWS (1S).
15F
54M
G
Fill the holes 1/4 to 1/2 full with GLUE.
www.sauder.com/services
3G
H
113S
BLACK 1-15/16" FLAT HEAD SCREW
(1 used in this step)
415910
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
BLACK 9/16" LARGE HEAD SCREW
(2 used in this step)
Surface with hole
T
G
A2
1S
Page 13
Publicidad
