Publicidad
STEP 2A
4
POSITION TEMPLATE
06
To calculate your precise wall plate location, check out our
TIP:
HeightFinder at sanus.com [www.sanus.com/1173].
Place the wall plate template
06
your stud center lines. Level and mark the hole locations.
10
(continued)
HeightFinder™
sanus.com
at your desired height and position the slotted holes over
5
DRILL
Visit
/1173
4X
CAUTION:
Drill the four pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2 ¾ in. (6.9 cm).
06
Be sure you drill into the CENTER of the stud.
2 ¾ in. (6.9 cm)
7/32 in.
(5.5 mm)
Publicidad
