Nuna trvl Manual De Instrucciones página 8

Product Information
Model Number: ______________________________________________________________________________
Manufactured Date: _________________________________________________________________________
Warranty
We have purposely designed our high-quality products so that
they can grow with both your child and your family. Because we
stand by our product, our gear is covered by a custom warranty
per product, starting from the day it was purchased. Please have
the proof of purchase, model number and manufactured date
available when you contact us.
For warranty information please visit:
www.nunababy.com
Click the "Warranty" link on the homepage.
Contact
For replacement parts, service, or additional warranty questions,
please contact our customer service department.
info@nunababy.com
www.nunababy.com
In the United Kingdom:
infouk@nunababy.com
www.nunababy.com
NUNA International B.V.
Van der Valk Boumanweg 178 C
2352JD Leiderdorp
The Netherlands
Child Usage Requirements
This stroller is suitable for use with children who meet the
following requirements:
Birth to 22 kg or 4 years whichever comes first.
When using the stroller frame with a NUNA infant carrier, refer to
the child usage requirements listed in the infant carrier instruction
manual.
Product Set Up
Open Stroller
1
- Take the stroller frame out (1).
2
- Rotate the stroller handle up (2) and open the stroller frame
(3)(4). A "click" sound means the stroller frame is open
completely.
Basket
Hook the basket on the rear legs on the both sides. (5)
Rear Wheels
1
- Insert the rear wheel into the rear leg. A "click" sound means
the rear wheel is assembled completely. (6)
2
- To remove the rear wheel, press the release button (7)-1 and
detach the rear wheel from the rear leg (7)-2.
3
TRVL instructions
Front Wheels
1
- Insert the front wheel into the front leg. A "click" sound
means the wheel is assembled completely. (8)
2
- To remove the front wheel, press the release button (9)-1
and then detach the front wheel from the front leg (9)-2.
Canopy
Slide the canopy mounts onto the stroller (10). A "click" sound
means the canopy is assembled completely.
Armbar
1
- Align the armbar ends with the armbar mounts, and insert
until it clicks into place (11).
A "click" sound means the armbar is assembled completely.
2
- Press armbar release button (12)-1, and then pull up the
armbar (12)-2.
Product Use
Securing Your Child
1
- Push the top button (13)-1, the buckle will release
automatically. (13)-2
2
- Match the waist belt buckle with the shoulder buckle, and
align them with the center buckle, the buckle can lock
automatically. (14)
3
- Fit the harness snugly to your child by sliding the adjustment
straps to tighten (15)-1. Then pull the waist adjustment straps
out (15)-2.
Shoulder Harness Position
1
- Thread the fixing webbing on the Shoulder harness pads
through the hole of buckle. (16)(17)
2
- The upper shoulder harness buckles can be moved up and
down for added adjustment. (18)
Canopy
For added air flow, unzip the back zipper to expose the mesh. (19)
Calf Support
The calf support has 2 positions.
1
- To raise the calf support, lift up.
2
- To lower the calf support, press the adjustment button in the
middle of the calf support (20)-1, and push down
(20)-2.
Recline
1
- To raise the recline, pull the tether and push the seat up. (21)
2
- To recline the backrest, squeeze the backrest adjustment
handle and pull the backrest down (22).
Brake
1
- To lock the rear wheels, step down on the brake lever. (23)
2
- To unlock the rear wheels, step down the brake lever again.
(24)
Front Swivel Locks
1
- It is recommended to use the front swivel locks on uneven
surfaces.
2
- Turn the front swivel lock to lock the front wheel (25). Turn
back to unlock (26).
Fold
1
- Fold the canopy. (27)
2
- Slide the secondary lock and then squeeze the folding
button (28).
3
- While squeezing the folding button, fold the handle down,
the stroller will fold and stand on its own. (29)-(31)
4
- You can carry the stroller with the strap. (32)
Accessories
Not all accessories are included on some models.
PIPA Series Infant Child Restraint
For infant carrier assembly and usage, please refer to the infant
carrier instruction manual.
Recline the stroller seat to the lowest position, push the canopy to
the rear of the stroller and attach the arm bar.
1
- To open the infant carrier lock, slide the latch out (33)-1. To
close the infant carrier lock, slide the latch in (33)-2.
2
- Place the infant carrier on the stroller so it sits over the arm
bar (34). Then close the infant carrier lock. (33)-2
3
- To remove the infant carrier, open the infant carrier lock
(33)-1, squeeze the release handle (35)-1 and lift the infant
carrier up (35)-2.
TRVL Rain Cover
Check that the canopy is completely open before attaching the
rain cover
To assemble the rain cover, place it over the pushchair. (36)
Carry Bag
Put the folded stroller into the carry bag and close the bag using
the drawstring. (37)
Cleaning and Maintenance
Clean the frame, plastic parts, and fabric with a damp cloth, but
do not use abrasives or bleach. Do not use silicon lubricants as
they will attract dirt and grime. Do not store your stroller in a
damp place.
Clean the stroller wheels regularly with water and remove any dirt.
To ensure long-lasting use, wipe off this product with a soft,
absorbent cloth after using it in rainy weather.
Refer to the care label attached to the fabric for washing and
drying instructions.
It is normal for fabric to color from sunlight and to show wear and
tear after a long period of use, even when used normally.
For reasons of safety, only use original Nuna parts.
Check regularly if everything functions properly. If any parts are
torn, broken, or missing, stop using this product.
TRVL instructions
4