EDIFIER W280NB Manual

1. Pairing
1. Press and hold the "
Green LED will blink alternately.
2. Select "EDIFIER W280NB" in your device setting
to connect. Green LED will blink twice per 5s
after connected.
Pairing for the first time
1. Power on for the first time. Red and Green LED will
blink alternately.
2. Select "EDIFIER W280NB" in your device setting to
connect.
Note:
For subsequent use, the headphone will auto-connect to
device used last time.
2. Reset
1. Power on and disconnected to any devices.
2. Simultaneously press and hold the " + " " - " buttons
for 5s to clear pairing records.
3. Green LED will blink 6 times rapidly then off when
successful.
3. Dual Connectivity
1. Pair device A with the headphone. Upon successful
press and hold the "
2. Select "EDIFIER W280NB" in device B to connect.
3. Select "EDIFIER W280NB" in device A to connect
manually.
4. Green LED will blink twice per 5s when successful.
4. Controls - Power ON/OFF / Modes
5. Controls - Volume / Music / Call
x1
x1
Note:
1. : Press and hold.
2. Please do not charge the headphone when there is
sweat or other liquids inside the charging port，
which may damage the headphone.
3. Images are for illustrative purposes only and may
differ from the actual product.
4. Download Edifier Connect App for more
customizable control settings.
Input：5V
For more information, please visit our website:
@Edifierglobal
Model: EDF200039
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
2021 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change
from time to time without prior notice.
Products of EDIFIER will be customized for different
applications. Pictures and illustrations shown on this
manual may be slightly different from actual product.
If any difference is found, the actual product prevails.
W280NB
Wireless Sports Headphones with Active Noise Cancellation
500mA
@Edifier_Global
Manual
" button for 3s. Red and
5s
A
3s
B
" button for 3s again.
3s
EDIFIER W280NB
EDIFIER W280NB
2s
x1
x1
x1
x2
@Edifier_Global
x1
2s
x1
x2