EDIFIER TWS1 Pro 2 Manual

T WS 1 P ro 2
True Wireless Noise Cancellation In-Ear Headphones
EN 1. Power ON/OFF
1. Power ON when the case is opened.
2. Power OFF when placed in the case and the case is closed.
2. Pairing
1. Power ON when the case is opened.
2. Press and hold the button on the case for 3s. White and red LED
will blink rapidly.
3. Select "EDIFIER TWS1 Pro 2" in your device setting to connect.
1st Pairing
1. Power ON when the case is opened. White and red LED will blink
rapidly
2. Select "EDIFIER TWS1 Pro 2" in your device setting to connect.
Note:
For subsequent use, the earbuds will auto-connect to device used
last time.
3. Left & Right connection/Reset
Indicator
1. Power ON when the case is opened.
2. Press 3 times the button on the case. The indicator blinks white
until reset is completed.
3. Once the headphones are reset, they enter pairing mode
automatically.
4. Status Indicator
Open the case or press 1 time the button on the case to check the
charging case battery status.
Battery Status:
Low battery: Red LED on for 2s
Charging: Red LED on
Fully charged: LED off
5. Controls
Left Touch Panel
Note:
1. ANC Setting switch between"High Noise Cancellation"&"Ambient
Sound"&"Noise Cancellation Off".
2. Customized controls via Edifier Connect App.
3. Images are for illustrative purposes only and may differ from the
actual product.
For more information, please visit our website:
@Edifierglobal
Model: EDF200114
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
2023 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for different applications.
Pictures and illustrations shown on this manual may be slightly
different from actual product. If any difference is found, the actual
product prevails.
Manual
Indicator
Indicator
x2
x3
x2
x2
www.edifier.com
@Edifier_Global
x3
Indicator
Right Touch Panel
x2
x3
x2
x2
@Edifier_Global
3s