Descargar Imprimir esta página

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 3

Enlaces rápidos

Tr ue Wirel es s Nois e C a ncel l atio n In-Ea r H ea d p h o nes
EN 1. Power ON/OFF
1. Power ON when the case is opened.
2. Power OFF when placed in the case and the case is closed.
Note:
If there is no Bluetooth connection for 10 minutes after power on, the
earbuds will turn off automatically; if there is no Bluetooth connection in
noise cancellation or ambient sound mode, the earbuds will turn off
automatically after 2 hours.
2. Pairing
1. Earbuds placed in the case and keep the case open.
2. Press and hold the button on the case for about 3s. LEDs will be lit one
by one from left to right in a circulating pattern.
3. Select "EDIFIER W240TN" in your device setting to connect. LEDs will
blink twice and then turn off when successfully.
1st Pairing
1. Earbuds placed in the case and keep the case open. LEDs will be lit
one by one from left to right in a circulating pattern.
2. Select "EDIFIER W240TN" in your device setting to connect. LEDs will
blink twice and then turn off when successfully.
Note:
For subsequent use, the earbuds will automatically connect to the device
used last time.
3. Reset
1. Earbuds placed in the case and keep the case open.
2. Press the button on the case 3 times to re-enter left & right connection
and clear pairing records. LEDs will be lit one by one from sides to
center in a circulating pattern and then will blink twice when successfully.
3. Select "EDIFIER W240TN" in your device setting to connect. LEDs will
be lit one by one from left to right in a circulating pattern, then will blink
twice and turn off when successfully.
4. Charging
5. Controls
Left MFB Button
Note:
1. Default sound control:both earbuds-noise cancellation & ambient sound
& noise cancellation off; single earbud-noise cancellation off & ambient
sound.
2. Images are for illustrative purposes only and may differ from the actual
product.
3. Download Edifier Connect App for more customizable control settings.
For more information, please visit our website:
@Edifierglobal
Model: EDF200091
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
2022 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for different applications.
Pictures and illustrations shown on this manual may be slightly
different from actual product. If any difference is found, the actual
product prevails.
W 240TN
Manual
Indicator
Indicator
Indicator
Charging case
1. Please connect the case to power source
with the included Type-C charging cable
for charging.
2. LEDs are steady lit when charging and off
when fully charged.
Note:
Please do not charge the earbuds when there
is sweat or other liquids inside the charging
port, which may damage the earbuds.
Input: 5V
x1
x1
x1
2s
x2
x3
2s
2s
2s
www.edifier.com
@Edifier_Global
Button
Button
200mA(Earbuds)
5V
1A(Charging case)
x1
x1
x1
2s
x2
x3
2s
2s
2s
3s
x3
Right MFB Button
@Edifier_Global

Publicidad

loading

Resumen de contenidos para EDIFIER W240TN

  • Página 1 2. Press and hold the button on the case for about 3s. LEDs will be lit one by one from left to right in a circulating pattern. 3. Select "EDIFIER W240TN" in your device setting to connect. LEDs will blink twice and then turn off when successfully.
  • Página 2 2. Maintenez le bouton sur l'étui appuyé pendant environ 3s. Les LED s'illumineront les unes après les autres de gauche à droite en cycle. 3. Sélectionnez «EDIFIER W240TN» dans les paramètres de votre appareil pour vous connecter. Les LED clignotent deux fois, puis s'éteignent lorsque l'opération est réussie.
  • Página 3 2. Mantenga pulsado el botón de la funda aproximadamente 3s. Los LED se iluminarán uno a uno de izquierda a derecha en un patrón circular. 3. Seleccione "EDIFIER W240TN" en la configuración de su dispositivo para conectar. Los LED parpadearán dos veces y se apagarán cuando sea correcto.
  • Página 4 2. Halten Sie zum die Taste am Koffer ca. 3 s gedrückt. Die LEDs leuchten dann nacheinander von links nach rechts in einem kreisförmigen Muster auf. 3. Wählen Sie „EDIFIER W240TN“ in Ihren Geräteeinstellungen, um eine Verbindung herzustellen. Die LEDs blinken zweimal und erlöschen dann, wenn der Vorgang erfolgreich war.
  • Página 5 2. Premere e tenere premuto il pulsante sulla custodia per 3s. I LED si accendono uno dopo l'altro da sinistra a destra in uno schema circolare. 3. Selezionare "EDIFIER W240TN" nel proprio dispositivo per effettuare la connessione. I LED lampeggeranno due volte e poi si spegneranno quando l'operazione andrà...
  • Página 6 2. Pressione e mantenha pressionado o botão no estojo por cerca de 3s. Os LEDs irão acender um a um da esquerda para a direita em um padrão circular. 3. Selecione "EDIFIER W240TN" na configuração do seu dispositivo para conectar. Os LEDs piscarão duas vezes e desligarão quando o procedimento for bem-sucedido.
  • Página 7 2. ケースにいれて閉じると電源がオフになります。 注: 電源を入れてから10分間Bluetooth 接続がない場合、イヤホ ンの電源は自動的にオフになります;ノイズ・キャンセル・ モードまたはアンビエント・サウンド・モードでBluetooth 接続がない場合、イヤホンの電源は2時間後に自動的にオフ なります。 2. ペアリング インジケーター ボタン 1. イヤホンをケースに入れ、ケースを開いたままにします。 2. ケースのボタンを約3s押してください。 LEDが左から右 に1つずつ順に循環して点灯します。 3. 接続設定するデバイスで「EDIFIER W240TN」を選択しま す。 接続完了するとLEDは2回点滅して消えます。 初回のペアリング 1. イヤホンをケースに入れ、ケースを開いたままにします。 LEDが左から右に1つずつ順に循環して点灯します。 2. 接続設定するデバイスで「EDIFIER W240TN」を選択しま す。 接続完了するとLEDは2回点滅して消えます。 注: 後の使用のために、 イヤホンは前回使用したデバイスに自 動接続します。 3.リセット インジケーター ボタン...