Publicidad
Idiomas disponibles
Idiomas disponibles
Chapter 4. Safety standards
4.2. Warnings
THE MACHINE CAN NOT BE USED BY UNTRAINED PERSONNEL!
During work pay attention to all hot parts of the machine. The temperature they can reach is so high
that it can cause burns.
Smoking is forbidden while the machine is operating!
Never use gaseous mixtures in presence of oxygen in a percentage higher than the atmospheric one
(~ 19%).
Do not touch the sealing blade (16) immediately after sealing.
Danger of burns due to hot blade.
Do not seal if the sealing wire is broken.
Replace it immediately.
Do not touch the vacuum pump (23) just after a working cycle.
Possibility of burning due to the high temperature the pump
may reach.
For mod. MV26 X only.
Before any working cycle make sure that the closing hook (19)
will not prevent the operator from closing the cover correctly.
Possibility of breaking the cover.
In case of a power failure during a working cycle when the
cover is closed, do not use any tool in order to force its
opening.
Wait for the power supply to be restored.
4.3. Individual protection devices
Wear safety shoes that protect feet from impacts, crushing and compression while moving or handling the
machine.
Wear safety gloves that protect the hands from crushing and mechanical hazards and while moving or
handling the machine.
Wear safety gloves that protect the hands against cutting risks while changing the sealing blades.
Wear safety gloves that protect the hands against the specific risks associated with the materials to be
packed (mechanical, chemical) and against coming into contact with the high temperatures present on the
seals and/or sealing bars (up to 100°C).
Wear safety gloves that prevent the hands from coming into contact with foodstuffs when
packaging them.
All manuals and user guides at all-guides.com
17
GB
Publicidad
