7. Error handling and troubleshooting
Problem
possible causes
• The machine is
• Mains plug is incorrectly inserted
without function or
into the mains socket.
malfunctioning.
• Mains plug is defective.
• Mains fuse was tripped.
• The machine is
• The driving disc or abrasive is not
too noisy.
attached correctly.
• Machine vibration
• The material or substrate to be
is excessive.
processed is too hard.
• The machine
• Clogged extraction system.
produces too much
dust.
• Dust bag in the industrial extractor
is full.
• Insufficient
extraction perfor-
• Kink in the extractor hose.
mance.
• The extraction openings in the
driving disc and sanding disc are not
congruent.
• Too much of
• The grit size of the abrasive is too
the substrate is
large.
abraded.
• The entire sand-
• The abrasive grit is incorrect or too
ing area displays a
large and/or the incorrect type of
bad or sub-optimal
abrasive is being used.
surface quality.
• The material or substrate to be pro-
cessed is not yet completely dry.
• The material or substrate to be
processed is too soft and/or has a very
high filler content.
• Striae in the
• Driving disc not flat on the substrate.
sanded area.
• The material or substrate to be
processed is too soft.
• Deteriorating
• Reverse of the abrasive is worn.
adhesion of
the abrasive or
• Hook & loop layer on the driving disc
the driving disc
is worn.
accessory.
12 EN
All manuals and user guides at all-guides.com
remediation
• Check the plug connection; insert
the mains plug correctly into the
mains socket.
• Contact the MENZER repair service.
• Attach the driving disc and abrasive
securely and centrically.
• Change the rotational speed.
• Choose another abrasive. Read our
abrasive overviews or seek advice.
• Clean the extraction system.
• Empty the dust bag.
• Remove the kink.
• Position the extraction openings
congruently.
• Choose a smaller grit size.
• Choose a smaller grit size and/or a
different type of abrasive. Read our
abrasive overviews or seek advice.
• Read the data sheets and processing
instructions provided by the manufac-
turer of the material to be processed.
• Position the driving disc flat on the
substrate.
• Choose a smaller grit size.
• Replace the abrasive.
• Replace the driving disc.
8. Transport and storage
The machine must only be transported in the
original MENZER packaging provided.
Always store the sander in its appropriate packag-
ing outside the reach of children and prevent
exposure to moisture.
9. Disposal
Do not dispose of electric power tools in house-
hold waste!
The power tools, their accessories and packaging
must be ecologically recycled in compliance with
national requirements!
EU only:
In accordance with the EU Directive
2012/19/EU on electrical and electronic waste,
electric power tools must be collected separately
and ecologically recycled.
10. Functional accessories and
peripherals
Only use original MENZER accessories matching
this particular power tool for optimal work results.
X. MENZER universal adapter for extractor hoses
with a larger diameter to connect to commercial
industrial dust extraction units (see page *2*) –
included in the scope of delivery
Y. MENZER industrial dust extraction units (see
page *3*) – not included in the scope of delivery:
https://www.menzer-tools.com/
en/industrial-vacuum-cleaners
11. EC declaration of conformity
0511-B01-01-000001-A
We hereby declare under our own responsibility
that the machines listed in the following, marketed
by us and described in this operating manual com-
ply with the following standards. This declaration
loses its validity in case of a change carried out on
one of the machines without our consent.
Product:
Random Orbital Sander
MENZER ETS 150 [ 5.0 ]
Type:
Serial number range: 181 xxx xxx
Type:
MENZER ETS 150 [ 2.5 ]
Serial number range: 182 xxx xxx
relevant EC directives
2006/42/EC; (EC) Nr. 1907/2006 (REACH);
2011/65/EU; 2014/30/EU
Angewandte harmonisierte Normen
EN 62841-1; EN 62841-2-4; EN 55014-1;
EN 55014-2; EN 61000-3-2; EN 61000-3-3
MENZER GmbH
Straße des 17. Juni 4
Torsten Ceranski
04425 Taucha
Managing director
Germany
Taucha, 11/06/2019
12. Warranty conditions
The consumer is granted a warranty with the
purchase of a MENZER electric power tool from
the BASE LINE product family.
The detailed terms of warranty can be found at:
https://www.menzer-tools.com/
service.
MENZER service
Phone:
+49 (0) 342 98 74 14 15
Fax:
+49 (0) 342 98 74 14 29
Email:
service@menzer-tools.com
No liability for typographical errors.
Subject to technical changes.
EN 13