Vortice CB TOUCH LCD W Manual De Instrucciones página 14

ENGLISH
NOTE: During installation, the installer must choose only one interface to use
(it is not possible to use two interfaces at the same time during installation).
Home screen
Menù key
Automatic
mode
Boost
speed
Holiday
mode
Functions
From the functions menu it is possible to activate / deactivate and set the main
functions of the recuperator such as Bypass, holiday mode, night mode etc ...
Use the arrows to select the function and press the icon in the center to
activate / deactivate it. Activation is indicated by a green dot next to the
function icon as shown above.
By pressing the key
function, for example the choice of the bypass activation temperature, in this
case.
14
Night light Status bar
Increase + and
decrease - speed
it is possible to access the settings of the single
value selec-
temperature,
Allarms
IoT Systems
Type of
tion
Ex:
humidity
etc...