Vortice CB TOUCH LCD W Manual De Instrucciones página 15

ENGLISH
ATTENTION: The functions present in this menu may vary according to the
heat recovery unit chosen. See the heat recovery unit manual for details on
its functions.
ATTENTION: Acting too quickly on the selection of functions, setting
parameters etc ... could result in anomalies.
ATTENTION: In the event of a blocking alarm, do not carry out any operation
before contacting the authorized VORTICE technical assistance center.
Weekly programming
(function not present on IoT systems versions)
From the weekly programming menu it is possible to set the automatic
operation (activated with the auto key on the AUTO home screen) of the
recuperator during the week.
Each day allows up to a maximum of 6 settable time bands. To select the time
bands from Monday to Friday or from Saturday to Sunday use the key
NOTE: The end time of the time slot corresponds to the start time of the next
slot, therefore it is possible to set only the start time of each slot.
Additional functions
Night Light: The night light can be activated at any time by accessing the
appropriate menu
Screen brightness: There are 3 brightness levels that can be set for the
screen.
15