Adjusting The Height Of The Headrest; Installation Points Within The Vehicle - Kindcomfort KYO 2/3 Manual De Uso

out of the vehicle.
10. the user shall be advised that the right items and plastic parts
of the chlid restraint must be so located and installed that they
are not liable, durin gevery day use of the vehicle, to become
trapped by a movable seat or in a door of the vehicle.
11. Keep the chlid seat away from the corrosive.
12. the manufacturer guarantee the quality of the products. But not
for the second hands product
13. Child seat should be changed when it has been subject to violent
stresses in an accident.
14. this user guide must be stored on the child seat, in the pocket
provided for the life of the child seat.
15. please read installation ma nual carefully before installation, if
any question, please call to our hot line: +34 943 833 013.
1. oVerVIeW
a. headrest height adjuster.
B. headrest.
C. Diagonal belt guides.
D. abdominal belt guides.
E. isoFix system connectors.

2. InstallatIon PoInts WItHIn tHe VeHIcle

Lap and diagonal belt, 3-points and
ISOFIX anchors (fig. A)
Lap belt, 2-points (fig. B)
12

3. adjustInG tHe HeIGHt of tHe Headrest

the correct adjustment of the headrest ensures that the child is
properly fastened into the car seat.
1. pull the headrest height adjuster
accordance with the size of the child (fig. 3.1).
4. fastenInG tHe cHIld Into tHe seat GrouP 2 and 3
only for use with Group 2-3 from approx.
notIce
4 to 12 years of age (15-36 kg)
Installing the IsofIx system
1. press the unlock buttons on the isoFix system and, keeping them
held down, pull out the isoFix adapters until they are completely
open (fig. 4.1).
2. Fasten the isoFix adapters to their respective connectors on the
car seat, ensuring that they make a "click" sound when they lock
into place. the isoFix system indicator will change from red to
green, confirming that it has been properly locked (fig. 4.2 and
4.3).
3. push the child seat against the car seat to check that the isoFix
system is fully latched, ensuring that the child seat is completely
in contact with the car seat (fig. 4.4).
uninstalling the IsofIx system
1. press the unlock buttons on the isoFix system and, keeping
them held down, pull backwards. the device will open, thereby
releasing the child seat (fig. 4.5).
(a)
and move it to height in
13