ALLURIS Fmi Connect Instrucciones De Servicio página 10

If you should wish to use another serial interface of your computer for connecting the force gauge,
please change the settings as shown below.
Select the COM port of your wish and click OK.
6.0 Collecting Data with Fmi_Connect
6.1 Continuous Data Transfer
If you wish to collect the force progression process during measurement, you will need to use the
continuous data transfer function.
In order to do this, enter the transfer rate (Hz = quantity of single values per second), the desired total
number of single values (1...1000) and when necessary the Start Value (force value 1...9999), from
10