Publicidad
Idiomas disponibles
Idiomas disponibles
Installation and starting up
The original packaging has been designed for dispatch by post. Keep it in case you need to return the kettle
to the supplier. Before installing the kettle, comply with all the points of the safety instructions on the pre-
vious pages. After removing the kettle from its packaging, make sure that it is in perfect condition and make
sure that no kind of matter, packaging material, warranty sheets or the like have accidentally fallen inside the
kettle during transport or while opening the packaging.
The plastic bag in which the kettle is packaged should be kept out of reach of children as it poses a suffoca-
tion hazard. Be sure that the kettle is in perfect conditions. In order to remove dust that may have accumula-
ted on the exterior surfaces of the kettle, simply dust it off with a dry soft cloth.
After you have carried out the above steps and have strictly followed the safety standards, proceed to con-
nect to the power supply. Connecting to power supply: electric current can kill! Follow safety instructions!
Plug the power cord (6) of the kettle into a power socket of the same voltage of the one indicated on the
rating plate underneath the kettle.Rinse out carefully all the internal surfaces and the spout of the kettle: fill
the kettle with water until the maximum level (1200 ml/ 40.58 US fl.oz / 42.23 UK fl.oz), boil it and empty
the boiler. Repeat at least two times.
FILL THE KETTLE:
a) remove the kettle body from the power base unit (5). Hold it by the handle (3)
b) remove the lid pulling the knob (picture "b"). The lid (1) is removable.
c) fill the kettle with water directly under the tap or fill it by pouring water from a bottle, jug or jar to the
needed level. Do not overfill the kettle. Be careful not to go over 1200 ml (40.58 US fl.oz / 42.23 UK fl.oz),
please do not exceed the water maximum level mark ( picture "d").
b
d
16
Publicidad
