Velleman CAMCOLI6 Manual Del Usuario página 9

Cámara de inspección wifi para smartphone y tablet
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
Deleting Videos and Snapshots
You can delete any unwanted videos or snapshots from the folders where they are stored. Proceed as follows:
1.
Exit the iSnakescope app.
2.
Locate your iSnakescope folder.
o To delete a video: tap the Delete button in the upper right corner, and then tap the delete icon next to the video
that you want to delete.
o To delete a snapshot: tap PictureList to display the list of snapshots, then tap the Delete button in the upper right
corner, and then tap the delete icon next to the snapshot that you want to delete.
3.
To return to the live images screen, tap Return in the left top corner of the screen.
8.2
Configuration
Image Resolution
To choose the image resolution, proceed as follows:
1.
From the live images screen, tap the settings button
2.
Tap Resolution Settting and select the desired image resolution.
3.
To return to the live images screen, tap Close.
Image Brightness
You can adjust the image brightness as follows:
On the camera: turn the thumbwheel [5] to adjust the brightness of the LEDs in the camera and so provide a brighter
or darker image.
Note: using the LEDs at a higher brightness decreases the camera's battery life.
In the iSnakescope app: use the brightness slider in the Setting screen.
To adjust the image brightness in the app, proceed as follows:
1.
From the live images screen, tap the settings button
2.
Tap Brightness Settting and move the brightness slider to adjust the image brightness.
3.
To return to the live images screen, tap Close.
Wi-Fi Settings
You can rename the iSnakescope Wi-Fi hotspot, and you can change the password. Note: the first time you reconnect
after changing the name or password, you have to enter the password again.
Proceed as follows:
1.
From the live images screen, tap the settings button
2.
Tap Wifi Setting.
3.
To change the name of the Wi-Fi hotspot, type the desired name in the SSID box. The name can be any combination
of letters and numbers that is at least 8 characters long.
4.
To change the password, type the desired password in the Password box. The password can be any combination of
letters and numbers that is at least 8 characters long.
5.
Tap OK to confirm the changes.
6.
To return to the live images screen, tap Close.
V. 02 – 11/04/2014
CAMCOLI6
. The Setting screen appears:
.
.
9
©Velleman nv

Publicidad

Tabla de contenido
loading

Tabla de contenido