Parkside PNS 300 B3 Traduccion Del Manual De Instrucciones Originale página 10

Use
Switching on and off
Switching the appliance on
♦ Press the ON/OFF switch
Switching the appliance off
♦ Release the ON/OFF switch
Switching to continuous operation
♦ Press the ON/OFF switch
pressed position with the locking button
Continuous operation can only be set at
maximum speed.
Switching off continuous operation
♦ Press the ON/OFF switch
again.
Adjusting the rotational speed
Press the ON/OFF switch
speed. Increasing the pressure increases the speed.
Changing the direction of rotation
WARNING!
► The rotation direction switch
used/adjusted if the appliance is at a stand-
still.
♦ Change the direction of rotation by pressing the
rotation direction switch
right.
PNS 300 B3
.
.
. Lock it in the
.
and release it
lightly for a low
may only be
towards the left or
Maintenance and cleaning
WARNING! RISK OF INJURY!
Switch the appliance off and remove
the power plug before starting any
work on the appliance.
The appliance is maintenance-free.
■ The appliance must always be kept clean, dry
and free from oil or grease.
■ Never allow liquids to get into the appliance.
■ Use a soft, dry cloth to clean the housing.
Never use petrol, solvents or cleansers which
can damage plastic.
WARNING!
► If the connecting cable needs to be replaced,
this must be carried out by the manufacturer
or an authorised representative in order to
avoid safety hazards.
NOTE
► Spare parts which are not listed (e.g. carbon
brushes, switches) can be ordered using our
service hotline.
► Have the carbon brushes replaced by the
manufacturer, by Customer Service or a
similarly qualified person.
GB │ IE │ 7 ■