Sanus VisionMount LR1A Instrucciones De Montaje página 5

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL BEFORE USING THIS PRODUCT
Thank you for choosing the LR1A in-wall mount. The LR1A in-wall mount is designed to be used with VM400, MF215 or LRF118 adjustable arm wall mount.
Range of motion and size limitations will vary depending on the adjustable arm wall mount selected; the maximum extension of the arm will be reduced by 9
cm (3.5 in.) when using the LR1A.
LRF118: The weight of the monitor and adjustable arm wall mount must not exceed 60 kg (130 lb).
Ù
VM400: The weight of the monitor and adjustable arm wall mount must not exceed 45.5 kg (100 lb).
Ù
MF215: The weight of the monitor and adjustable arm wall mount must not exceed 27 kg (60 lb).
Ù
CAUTION:
Avoid potential personal injuries and property damage!
Do not use this product for any purpose not explicitly specified by manufacturer.
Ù
The wall must be capable of supporting five times the weight of the monitor and mount combined.
Ù
This product is designed for use in wood frame walls only!
Ù
If you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of this product, contact manufacturer
Ù
Customer Service or call a qualified contractor.
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
Ù
OFFSET DISTANCE: 4.64"
17.53
14.83
6901-170124 <01>
(ACCOMMODATES 15.50"-16.25" O.C. 2x4 STUDS)
(TV TO LR1A)
1.14
English
CAUTION:
3.51
(ACCOMMODATES 15.50"-16.25" O.C. 2x4 STUDS)
2.38
ADJUSTMENT RANGE: 14.00"-14.75"
OFFSET DISTANCE: 4.64"
(TV TO LR1A)
1.14
14.08
16.78
3.51
2.38
ADJUSTMENT RANGE: 14.00"-14.75"
2.36
2.36
5