Sanus VisionMount LR1A Instrucciones De Montaje página 8

2
Mark Mounting Holes
1
[01]
[06]
NOTE:
Do not overtighten the quick shim
fasteners [06]. Tighten only enough to
prevent the housing [01] from moving;
the fasteners should only press against
the studs, not penetrate them.
8
[15]
2
3
63.5 mm
CAUTION:
To avoid potential injuries or property
damage: pilot holes MUST be drilled
to a depth of 63.5 mm (2.5 in.), using a
3 mm (1/8 in.) diameter drill bit.
3 mm
(1/8 in.)
[01]
6x
6x
2.5 in.
6901-170124 <01>