Sanus VisionMount LR1A Instrucciones De Montaje página 9

3
Fasten Housing to Studs
CAUTION:
Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or
property damage: DO NOT overtighten the lag bolts [10]. Tighten the lag bolts only until
the washers [11] are pulled firmly against the inside of the quick shims [06].
[01]
[06]
[11]
4
Install Junction Box (Optional)
WARNING:
[09]
[01]
NOTE:
Knock-outs [K] are provided for the
installation of an electrical junction
box and for routing cables.
6901-170124 <01>
[10]
Electric Shock Hazard! Avoid potential serious injuries or death. Consult a qualified
electrician for proper installation.
[K]
6x
OPT
OPT
9