Ordering Replacement Parts; Disposal And Recycling; Storage And Transport - EINHELL GE-HM 38 S Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 56
vals and make sure that it is tightly fastened.
If the blades on the mower spindle become
blunt and need replacing, please contact our
customer service. Use only genuine spare
parts.
7.2.1 Setting the counter blade (Fig. 8)
Warning! Wear safety gloves.
The counter blade (H) is pre-set at the factory.
Re-adjustment might be required after prolonged
use.
If the counter blade is too loose, the cut will
look rough and uneven.
If the counter blade is too tight, the mower will
be noisy and hard to push.
The Allen screws (G) on both sides of the mower
must be adjusted evenly such that the counter
blade (H) and the mower spindle (2) touch wit-
hout making hardly a sound.
Turn the Allen screw (G) clockwise = The
counter blade will move closer to the mower
spindle
Turn the Allen screw (G) counter-clockwise
= The counter blade will move further away
from the mower spindle
The counter blade (H) is correctly adjusted if a
piece of paper placed between the blades on the
mowing spindle (2) and the counter blade will be
cut along its full length when you turn one of the
wheels forwards by hand without force.

7.3 Ordering replacement parts:

Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
Anl_GE_HM_38_S_SPK7.indb 17
Anl_GE_HM_38_S_SPK7.indb 17
GB

8. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.

9. Storage and transport

Storage
Store the equipment and accessories out of
children's reach in a dark and dry place at above
freezing temperature. The ideal storage tempera-
ture is between 5 and 30 °C. Store the machine in
its original packaging.
Transport
Always carry the mower by its handle and ne-
ver reach into the cutting mechanism.
Fit the shipping protectors, if any.
Protect the machine from damage and the
strong vibrations that can occur particularly
when transporting in vehicles.
Secure the machine against slipping and tip-
ping over.
- 17 -
04.08.15 09:40
04.08.15 09:40

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

34.141.65

Tabla de contenido