Sanyo DS31520 Manual Del Propietário página 6

UNIVERSAL/MULTIMEDIA REMOTE CONTROL KEYS
Point towards TV
VCR
DVD SAT
POWER
INPUT
1
4
7
CAPTION
MENU
CH
VOL
CH
MUTE
V-GUIDE
PLAY
STOP
REC
TRACKING
Mode Keys
Use these keys to program the remote control and to
select the operating mode (VCR, TV, CABLE, DVD,
SAT, or AUX ).
Input Key—In the TV, DVD, Cable, and Satellite
modes, this key selects the program source to display
on the screen (TV signal or signal from equipment
connected to the A / V jacks). In the VCR mode, this
key functions as a VCR's TV/ VCR key.
Number Keys
Two keys must be pressed to select a channel.
Example: Press 0 then 6 to select channel 6. For cable
channels 100 through 125, press and hold the
1 key until C1– – appears. Then press the other two
numbers.
6
TV CABLE
AUX
RESET
2 3
11
5 6
8 9
0 12
SLEEP
13
RECALL
VOL
14
DISPLAY
15
ENTER
PAUSE
Caption Key (See page 16.)
Menu Key—Use this key with the
/ keys to navigate and adjust features of the
CH
CH
on-screen menu system (see pages 10 ~ 11). Use it to
display the Satellite Guide in the Satellite mode.
Channel (CH) Scanning (
VOL
VOL
Volume ( / ) Keys
Press to scan through the channels in memory
and to adjust the volume.
Mute Key
Press once to turn off the volume. Press again to
restore.
Note: When using the audio out jacks this key will not
mute the sound in the fixed mode, but will mute the
sound in the variable mode.
V-Guide Key (See pages 14 ~ 15.)
VCR/DVD Keys
These keys control VCR and/or DVD functions for
Fast Forward ( ), Rewind (
(Rec), Stop ( ), Tracking (– / +), and Pause.
Reset Key
Press this key twice to restore factory settings. The TV
will automatically start Channel Search and clear all
customized settings. (See page 15.) It has no function in
other modes.
11
Power Key
Press to turn TV on or off.
12
Sleep Key
Use this key with the "0" key to set the Sleep Timer
(see page 17).
13
Recall Key
Select a channel then select another channel using the
number keys. Press Recall to switch between the
channels.
14
Display Key
Press once to display the channel number. Press twice
to display the channel number continuously. Press
again to remove the display.
15
Enter Key—Satellite operation only.
VOL VOL
/ and
/ CH ) and
CH
), Play ( ), Record