Using Audio/ Video Input Jacks - Sanyo DS31520 Manual Del Propietário

QuickTips
Make sure all cable
connectors are fully
seated on jacks.
Always match cables
according to the
colors; for right
RED
audio, for left
WHITE
audio and for
YELLOW
video.
A solid Blue screen
with the word Video
displayed means that
the Video mode is
selected, but no signal
is being detected at
the Video jack.
You may be able to
use the remote con-
trol to operate your
VCR, Cable Box,
Satellite Receiver, and
TV. (See pages 7~9.)
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
12
USING THE AUDIO/ VIDEO INPUT JACKS
CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
1. Connect VCR, DVD, DSS, or other equipment's Audio Out (R/L) to the TV Audio
Input (R/L) .
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) Input.
2. Connect VCR, DVD, DSS, or other equipment's Video Out to the TV Video Input
Optional
Connect VCR, DVD, DSS, or other equipment's S-Video Out to the TV S-Video In
Jacks .
Using the S-Video In jacks overrides the Video In jacks
3. Press POWER to turn on the TV. Turn on external equipment also.
4. Press the INPUT key
you have connected to the A/V jacks.
Back of VCR
A/V JACKS
IN
VIDEO L- AUDIO -R
OUT
VIDEO L- AUDIO -R
Remote Control
CABLE
VCR TV
DVD SAT AUX
POWER
INPUT RESET
to select program source: TV signal or signal from the equipment
Back of TV
AUDIO VIDEO
AUDIO
INPUT
OUTPUT
S-VIDEO
INPUT
VIDEO
(MONO)
L L
AUDIO
R R
.
Back of DVD Player
OUTPUT
S-VIDEO OUT
L R
AUDIO OUT
VIDEO OUT
UHF/VHF/CATV
75Ω
.