Publicidad
B
C
FRONT LEGS
TO ATTACH LEGS TO STRETCHERS:
3) Spread a thin layer of glue in the holes in the Legs (B). Attach the Long Front Stretcher (C) and
the Short Back Stretcher (K) to a pair of legs, as shown in FIGURE 3.
PROCEED IMMEDIATELY TO STEP 4 WITHOUT DELAY.
FIG. 4
TO ATTACH THE LEGS TO SEAT:
4) With the Seat (H) laying face down on a protected surface, spread glue evenly in the four leg
holes in the bottom of the seat and insert the pair of legs with the Long Front Stretcher (C) in the
two front holes. The stretchers must face side to side and be on the end farthest from the seat.
Repeat for the other pair of legs with the Short Back Stretchers (K). See FIGURE 4.
PROCEED IMMEDIATELY TO STEP 5 WITHOUT DELAY.
PAGE 4 — 252Wa (Rev. 1/07)
B
B
C
H
B
FIG. 3
K
B
K
BACK LEGS
B
Publicidad
