Publicidad
FIG. 7
TO ATTACH THE ARMS
7) Spread glue evenly in the four arm spindle holes in the seat. Put the Arm Spindles (D) in the holes
making sure that the shoulders are in contact with the seat. Spread glue lightly in the holes in
the Left and Right Arms (E&F), then work the arms onto the spindles. Both arms should be snug
against the backposts. Be careful not to scratch the backpost with the arms while doing this.
Insert #8 x 2¼" Brass Pan Head Screws (N) through the holes in the backposts into the arms and
tighten firmly. See FIGURE 7.
PAGE 6 — 252Wa (Rev. 1/07)
N
E
F
D
Publicidad
