Intended Use; Ec Declaration Of Conformity - Makita JR103D Manual De Instrucciones

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Length of stroke
Strokes per minute
Max. cutting Pipe
capacities
Wood
Rated voltage
Battery cartridge
Overall length
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

Intended use

The tool is intended for sawing wood, plastic and fer-
rous materials.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Model JR103D
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Model JR105D
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model JR103D
Work mode: cutting boards
Vibration emission (a ) : 8.0 m/s
h,B
Uncertainty (K) : 1.5 m/s
Work mode: cutting wooden beams
Vibration emission (a
h,WB
Uncertainty (K) : 1.5 m/s
Model JR105D
Work mode: cutting boards
Vibration emission (a ) : 8.0 m/s
h,B
Uncertainty (K) : 1.5 m/s
Work mode: cutting wooden beams
Vibration emission (a
h,WB
Uncertainty (K) : 1.5 m/s
4 ENGLISH
BL1015, BL1020B
376 mm
1.3 kg
) : 78 dB(A)
pA
) : 78 dB(A)
pA
2
2
2
) 8.0 m/s
2
2
2
2
) 8.0 m/s
2
JR103D
13 mm
0 - 3,300 min
50 mm
50 mm
D.C. 10.8 V
BL1040B
386 mm
1.5 kg
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures to
protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only
Makita declares that the following Machine(s):
Designation of Machine: Cordless Recipro Saw
Model No./ Type: JR103D, JR105D
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents: EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
24.2.2015
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
JR105D
-1
BL1015, BL1020B BL1040B
376 mm
1.3 kg
386 mm
1.5 kg