HomeMatic IP HmIP-WTH-1 Manual De Instalacion Y Uso página 33

More detailed descriptions of the symbol functions can be found in
the chapter see „6 Operating modes and configuration" on page
38.
4 General system information
This device is part of the climate control solution of Homematic IP and
works with the Homematic IP radio protocol. All devices of the climate
control solution can be configured comfortably and individually with a
smartphone via the Homematic IP app. The available functions provided
by the Homematic IP system in combination with other components are
described in the Homematic IP User Guide. All current technical docu-
ments and updates are provided at www.homematic-ip.com.
5 Start-up
Please read this entire section before starting the pairing proce-
dure.
The wall thermostat must first be added in order to be able to communi-
cate with other devices in your system. To control your heating, you can
teach the wall thermostat to the Homematic IP Access Point as described
in see „5.1 Pairing the Homematic IP Access Point" on page 33.
For more information on teaching and setting up the wall thermo-
stat using a CCU3, please refer to the WebUI manual on our home-
page at www.homematic-ip.com.
5.1 Pairing the Homematic IP Access Point
First set up your Homematic IP Access Point via the Homematic IP
app to enable operation of other Homematic IP devices within your
system. For further information, please refer to the Access Point op-
erating manual.
To add your wall thermostat to the access point, please proceed as fol-
lows:
General system information
33