Publicidad
Table 8. Power Management (continued)
Option
Wake on LAN/WLAN
Advanced Battery Charge
Configuration
Primary Battery Charge
Configuration
Table 9. POST Behavior
Option
Adapter Warnings
Fn Lock Option
Fastboot
Table 10. Virtualization Support
Option
Virtualization
VT for Direct I/O
36
Configuración del sistema
Description
NOTE:
This feature is only functional when the AC power adapter is connected.
If the AC power adapter is removed during Standby, the system setup will remove
power from all of the USB ports to conserve battery power.
● Enable USB Wake Support
Default Setting: The option is disabled.
Allows you to enable or disable the feature that powers on the computer from the Off
state when triggered by a LAN signal.
● Disabled: This option is enabled by default
● LAN Only
This option enables you to maximize the battery health. By enabling this option, your
system uses the standard charging algorithm and other techniques, during the non-work
hours to improve the battery health.
Disabled (default)
Allows you to select the charging mode for the battery. The options are:
● Adaptive
● Standard - Fully charges your battery at a standard rate.
● Primarily AC use
● Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom
Charge Stop.
NOTE:
All charging mode may not be available for all the batteries. To enable this
option, disable the Advanced Battery Charge Configuration option.
Description
Allows you to enable or disable the system setup (BIOS) warning messages when you
use certain power adapters.
Default Setting: Enable Adapter Warnings
Allows the hot key combination <Fn> +<Esc> toggle the primary behavior of F1–F12,
between the standard and secondary functions.
● Lock Mode Disable/Standard. This option is enabled by default.
● Lock Mode Enable/Secondary
Allows you to speed up the boot process by bypassing some of the compatibility steps.
The options are:
● Minimal
● Thorough (default)
● Auto
Description
Allows you to enable or disable the Intel Virtualization Technology.
● Enable Intel Virtualization Technology (default)
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional
hardware capabilities provided by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O — enabled by default.
Publicidad
