Publicidad
Idiomas disponibles
Idiomas disponibles
2.8 BATTERYTOOL USE AND CARE
• RECHARGE ONLY WITH THE CHARGER SPECIFIED BY THE
MANUFACTURER. A CHARGER THAT IS SUITABLE FOR ONE TYPE OF BATTERY
PACK MAY CREATE A RISK OFFIRE WHEN USED WITH ANOTHER BATTERY PACK.
• USE POWER TOOLS ONLY WITH SPECIFICALLY DESIGNATED BATTERY
PACKS. USE OF ANY OTHER BATTERY PACKS MAY CREATE A RISK OF INJURY
AND FIRE.
• WHEN BATTERY PACK IS NOT IN USE, KEEP IT AWAY FROM OTHER
METAL OBJECTS, LIKE PAPER CLIPS, COINS, KEYS, NAILS, SCREWS
OR OTHER SMALL METAL OBJECTS, THAT CAN MAKE A CONNECTION
FROM ONE TERMINAL TO ANOTHER. SHORTING THE BATTERY TERMINALS
TOGETHER MAY CAUSE BURNS OR A FIRE.
• UNDER ABUSIVE CONDITIONS, LIQUID MAY BE EJECTED FROM THE
BATTERY; AVOID CONTACT. IF CONTACT ACCIDENTALLY OCCURS, FLUSH
2.9 SERVICE
• HAVE YOUR POWER TOOL SERVICED BY A QUALIFIED REPAIR PERSON
USING ONLY IDENTICAL REPLACEMENT PARTS. THIS WILL ENSURE THAT
THE SAFETY OF THE POWER TOOL IS MAINTAINED.
2.10 SAFETY INSTRUCTIONS FOR HEDGE TRIMMERS
• HEDGE TRIMMER SAFETY WARNINGS:
• KEEP ALL PARTS OF THE BODY AWAY FROM THE BLADE. DO NOT
REMOVE CUT MATERIAL OR HOLD MATERIAL TO BE CUT WHEN BLADES
ARE MOVING. BLADES CONTINUE TO MOVE AFTER THE SWITCH IS TURNED
OFF. A MOMENT OF INATTENTION WHILE OPERATING THE HEDGE TRIMMER
MAY RESULT IN SERIOUS PERSONAL INJURY.
• CARRY THE HEDGE TRIMMER BY THE HANDLE WITH THE BLADE
STOPPED AND TAKING CARE NOT TO OPERATE ANY POWER SWITCH.
PROPER CARRYING OF THE HEDGE TRIMMER WILL DECREASE THE RISK OF
INADVERTENT STARTING AND RESULTANT PERSONAL INJURY FROM THE
BLADES.
• WHEN TRANSPORTING OR STORING THE HEDGE TRIMMER, ALWAYS
FIT THE BLADE COVER. PROPER HANDLING OF THE HEDGE TRIMMER WILL
DECREASE THE RISK OF PERSONAL INJURY FROM THE BLADES.
2.11 ADDITIONAL SAFETY INSTRUCTIONS FOR EXTENDED-REACH HEDGE TRIMMERS
• EXTENDED-REACH HEDGE TRIMMER SAFETY WARNINGS:
WITH WATER. IF LIQUID CONTACTS EYES, ADDITIONALLY SEEK MEDICAL
HELP. LIQUID EJECTED FROM THE BATTERY MAY CAUSE IRRITATION OR BURNS.
• DO NOT USE A BATTERY PACK OR TOOL THAT IS DAMAGED OR MODIFIED.
DAMAGED OR MODIFIED BATTERIES MAY EXHIBIT UNPREDICTABLE
BEHAVIOUR RESULTING IN FIRE, EXPLOSION OR RISK OF INJURY.
• DO NOT EXPOSE A BATTERY PACK OR TOOL TO FIRE OR EXCESSIVE
TEMPERATURE. EXPOSURE TO FIRE OR TEMPERATURE ABOVE 130 °C MAY
CAUSE EXPLOSION.
• FOLLOW ALL CHARGING INSTRUCTIONS AND DO NOT CHARGE THE
BATTERY PACK OR TOOL OUTSIDE THE TEMPERATURE RANGE SPECIFIED
IN THE INSTRUCTIONS. CHARGING IMPROPERLY OR AT TEMPERATURES
OUTSIDE THE SPECIFIED RANGE MAY DAMAGE THE BATTERY AND INCREASE
THE RISK OFFIRE.
• NEVER SERVICE DAMAGED BATTERY PACKS. SERVICE OF BATTERY PACKS
SHOULD ONLY BE PERFORMED BY THE MANUFACTURER OR AUTHORIZED
SERVICE PROVIDERS.
• WHEN CLEARING JAMMED MATERIAL OR SERVICING THE UNIT,
MAKE SURE ALL POWER SWITCHES ARE OFF AND THE BATTERY PACK IS
REMOVED OR DISCONNECTED. UNEXPECTED ACTUATION OF THE HEDGE
TRIMMER WHILE CLEARING JAMMED MATERIAL OR SERVICING MAY RESULT IN
SERIOUS PERSONAL INJURY.
• HOLD THE HEDGE TRIMMER BY INSULATED GRIPPING SURFACES
ONLY, BECAUSE THE BLADE MAY CONTACT HIDDEN WIRING. BLADES
CONTACTING A "LIVE" WIRE MAY MAKE EXPOSED METAL PARTS OF THE HEDGE
TRIMMER "LIVE" AND COULD GIVE THE OPERATOR AN ELECTRIC SHOCK.
• KEEP ALL POWER CORDS AND CABLES AWAY FROM CUTTING AREA.
POWER CORDS OR CABLES MAY BE HIDDEN IN HEDGES OR BUSHES AND CAN
BE ACCIDENTALLY CUT BY THE BLADE.
• DO NOT USE THE HEDGE TRIMMER IN BAD WEATHER CONDITIONS,
ESPECIALLY WHEN THERE IS A RISK OF LIGHTNING. THIS DECREASES THE
RISK OF BEING STRUCK BY LIGHTNING.
215
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
Publicidad
