Samsung Jet Bot VR50T95 Serie Manual Del Usuario página 27

Cleaning the Clean Station
Before cleaning the Clean Station, unplug the power cord from the electrical outlet.
Replacing the Dust Bag
Cleaning the Fine dust Filter
1 Press the [PUSH]
button on the top
of the Clean Station
to open its cover.
3 Remove the old
Dust Bag and put
a new Dust Bag
into the Dust Bag
holder by fitting
into the grooves on
the holder.
– Push the Dust
Bag to the end.
1 Grasp the grooves
at the rear of the
Clean Station and
detach the Fine
dust Filter cover.
3 Clean the Fine dust
Filter.
– Do not clean the
Fine dust Filter
with water.
2 Pull the top of the
Dust Bag holder
gently.
– If you do not
pull the Dust
Bag holder, you
cannot replace
the Dust Bag
due to the safety
device.
4 Push the top of the
Dust Bag holder
gently until you
hear it click.
5 Close the Clean
Station's cover.
2 Detach the Fine
dust Filter.
4 Attach the Fine
dust Filter and the
Fine dust Filter
cover.
English 27