Samsung Jet Bot VR50T95 Serie Manual Del Usuario página 38

Corrective measures before reporting a problem
1 The Status Indicator
turns red and blinks
with a voice guide.
Voice Guide
It's difficult to move. Please move
me somewhere else.
Please remove the brush and take
out whatever's stuck in there.
Please check the left wheel to see
if there's something stuck in it.
Please check the right wheel to
see if there's something stuck in
it.
Something's wrong with the front
bump sensors. Please open the
cover and check. The bumper
might be jammed, or there might
be something stuck in there.
Can't see anything. Please clean
the front with a soft cloth.
Something's wrong with the cliff
sensor. Please clean the 5 small
black windows underneath with a
soft cloth.
Please insert the bin so cleaning
can start.
38 English
2 Turn off the power
switch and check the
instructions below
and take appropriate
actions.
• The Jet Bot is caught, stuck or trapped while moving
around.
– Turn off the power switch and move the Jet Bot to
another area.
• Foreign matter caught in the brush
– Turn off the power switch and remove the foreign
matter from the brush.
• Foreign matter caught in the left Driving Wheel
– Turn off the power switch and remove the foreign
matter from the left Driving Wheel.
• Foreign matter caught in the right Driving Wheel
– Turn off the power switch and remove the foreign
matter from the right Driving Wheel.
• Bumper Sensor needs to be checked.
– Turn off the power switch and turn it back on.
– When the Status Indicator remains in red color and
blinks, check if there's any small foreign matter
between the bumper and the main body. If there is,
remove the foreign matter.
• Foreign matter accumulated on the Obstacle Sensor
Window.
– Turn off the power switch and clean the Obstacle
Sensor Window at the front with a soft cloth.
• Foreign matter accumulated on the Cliff Sensor
– Turn off the power switch and clean 5 Cliff Sensor
Windows at the bottom with a soft cloth.
• Dustbin is not inserted.
– Detach the Dustbin and insert it again.
3 When turning the Jet
Bot on by pressing
the power switch, the
Status Indicator turns
white.
Checklist