Samsung Jet Bot VR50T95 Serie Manual Del Usuario página 35

Using
NOTE
• The Jet Bot may get caught on thresholds of entrance door or veranda,
etc. during cleaning.
– To restart operation, shut off the power switch, move the Jet Bot to an
area where it can move easily, and then turn on the power again.
• In a dark area, the Jet Bot may not recognize an object.
– Before cleaning, remove obstacles on the floor.
• The Jet Bot cannot completely clean areas which it cannot enter, such as
small space between the corner, between the sofas or walls, etc.
– Please use another cleaning tool to clean them regularly.
• The Jet Bot cannot vacuum clumps of dirt, so some may remain on the
floor after cleaning.
– Please use another cleaning tool to clean them regularly.
• After turning the Jet Bot off, wait for a while and then turn it on for a
normal rebooting.
• When the Clean Station smells, replace a Dust Bag or clean filters.
• If there is a larva in the suctioned dust, it can multiply in the Dust Bag.
Clean the Clean Station with a wet tissue and replace the Dust Bag.
English 35