Samsung Jet Bot VR50T95 Serie Manual Del Usuario página 8

• Be sure the Jet Bot does not suck in or touch any kind of liquids (water,
beverage, filth, etc.).
– The Jet Bot can be severely damaged and it may contaminate other
areas if the wheels pass through liquid.
• Do not spill any liquids on the Clean Station.
– There is a risk of fire or electric shock.
• Do not use the Clean Station for anything other than its intended
purposes.
– There is a risk of fire or severe damage to the Clean Station.
• Always keep the Cliff Sensor clean for your safety.
• As this wireless installation may cause radio interference, it cannot
provide a service related with human safety.
CAUTION
• Insert the Dustbin before using the Jet Bot.
• When installing the Clean Station, do not leave the cord carelessly on the
floor since the Jet Bot may get tangled by it.
• To clean all areas of your house, open all rooms and set the No-go Zones
with the SmartThings App or attach the Boundary Markers to the places
where the Jet Bot may get damaged such as a front door, a veranda, a
bathroom, and stairs for safety.
• Follow these recommendations for proper automatic recharging.
– Always turn on the power of the Clean Station.
– Install the Clean Station where the Jet Bot can easily find.
– Do not leave any objects in front of the Clean Station.
• Do not use the Jet Bot on black colored floors.
– The Jet Bot may not be able to operate normally.
• Do not place any objects within 0.5 m of either side of the Clean Station
or within 1 m of the front of the Clean Station.
• Make sure the Clean Station's charging contact is not damaged or have
any foreign matter on it.
8 English