Publicidad
Idiomas disponibles
Idiomas disponibles
2
MAKE WATER SUPPLY AND WASTE CONNECTIONS
• Connect FLEXIBLE SUPPLIES (1, 2) directly to wall
supplies.
Connection on fitting supplies are 3/8" compression.
Connect right SUPPLY (2) to Hot (Marked with a Red
Band) and left supply to COLD (1) wall supply.
• Faucet supplies are 20" long from faucet base.
Note: If additional supply length is required,
installer must purchase additional parts
separately.
Important: If SUPPLY HOSES (1, 2) are to long,
loop as illustrated to avoid kinking.
• Connect 1-1/4" O.D. tail piece on GRID DRAIN
towaste outlet.
A
3
DRAIN ASSEMBLY (6542.140/.170)
• Apply a bead of PUTTY around underside of
DRAIN FLANGE (1) flange. Insert DRAIN PLUG
(2) into SINK drain hole.
• Hold DRAIN PLUG (2) to prevent turning and
assemble
GASKET (3), WASHER (4) and LOCKNUT (5) from
underneath sink.
• Apply sealant to threaded end of TAILPIECE (6)
and thread into lower end of DRAIN PLUG.
Connect other end to trap.
B
APPROX. 20"
2
RED
BAND
HOT
PUTTY
3
4
5
6
1
BLUE
BAND
3/8" COMPRESSION
COLD
1
SINK
2
SEALANT
Publicidad
