American Standard Studio S 7105172 Manual Del Propietário página 5

4
TEST INSTALLED FITTING
• With HANDLE (1) in OFF position, turn on WATER
SUPPLIES (2) and check all connections for
leaks.
• Remove AERATOR (3).
• Operate HANDLE (1) to flush water lines
thoroughly.
• Replace AERATOR (3).
5
SERVICE
Turn off hot and cold water supplies
before beginning.
• Unthread Set Screw (1) and remove Handle (2).
• Remove Escutcheon Cap (3) by pulling. This is a
snap fit and will require some force to remove.
• Remove Cartridge Cap (4) by pulling.
• Unthread Cartridge Nut (5).
• Remove Cartridge (6) by pulling.
• Inspect Cartridge (6) for debris and clean if necessary.
• Inspect the faucet for debris and clean if necessary.
• Reinstall the cartridge and handle by reversing the
steps above.
6
CARE INSTRUCTIONS
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL
CLOTH. DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH
CLEANERS, OR A CLOTH WITH A COARSE SURFACE.
ON
1
OFF
COLD
HOT
WASTE
OUTLET
2
"P" TRAP
3
2
1
2
3
4
5
6