Setting the timer to turn one cooking zone off
Cooking zones set for this feature will:
1. Touching the heating zone selection control that you want to set
the timer for. (e.g. zone 1#)
2.Touch timer control, the minder indicator will start flashing and "30" will
show in the timer display.
3.Set the time by touching the "-" or "+" control.
Hint: Touch the "-" or "+" control once will decrease or increase by 1 minute.
Touch and hold the "-" or "+" control, the timer will decrease or increase
by 10 minutes.
If the setting time exceeds 99 minutes, the timer will automatically return to 0
minute.
4.When the time is set, it will begin to count down immediately. The
display will show the remaining time and the timer indicator flash for 5
seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
5.To cancel the timer, touch the heating zone selection control, and then touch the "-" of
timer and scrolling down to "0", the timer is cancelled, and the "00" will show in the minute
display, and then "--".
6.When cooking timer expires, the corresponding cooking zone will be
automatically switch off and show "H".
Other cooking zone will keep operating if they are turned on previously.
23