Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before use. Save these instructions for
your future reference.
1.
Only use the iron for its intended use.
2.
To avoid the risk of electric shock, do not immerse the iron in water or other
liquids.
3.
Always turn the iron OFF before plugging or unplugging the iron from the
electrical outlet. Never pull on the cord to disconnect the iron from the
electrical outlet - instead, grasp the plug and pull on the plug to disconnect
the iron.
4.
Do not let the cord touch hot surfaces. Let the iron cool completely before
putting the iron away. Coil the cord loosely around the iron when storing.
5.
Always disconnect the iron from the electrical outlet before filling the iron with
water and when the iron is not in use.
6.
Do not operate the iron with a damaged cord, or in the event that the iron has
been dropped and/or damaged. To avoid the risk of electric shock, do not
disassemble the iron. Take it to a qualified serviceman for examination and
repair. Incorrect assembly might result in a risk of electric shock when the iron
is used after reassembly.
7.
Close supervision is required for any appliance used by or near children. Do
not leave the iron unattended while the iron is connected or on an ironing
board.
8.
Burns can occur from touching hot metal parts, hot water, or steam. Use
caution when you turn a Steam Iron upside down - there might be hot water in
the reservoir.
9.
To avoid a circuit overload, do not operate an iron on the same circuit with
another high wattage appliance.
10. If an extension cord is absolutely necessary, a cord with an ampere rating
equal to or greater than the maximum rating of the iron shall be used. A cord
rated for less amperage can result in a risk of fire or electric shock due to
overheating. Care shall be taken to arrange the cord so that it cannot be
pulled or be tripped over.
4
Publicidad
