Descargar Imprimir esta página

KNOVA KN M-3057R Manual De Instrucciones página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

TABLE OF CONTENTS
Table of contents ..............................................................
Product specifications KN M-3057R .................................
Warnings ...........................................................................
Symbols ............................................................................. 1
Power tool safety ..............................................................
Compact sliding compound miter saw safety .................... 3
Electrical requirements and safety ....................................
Accessories and attachments ........................................... 5
Tools needed for assembly ............................................... 5
Carton contents ................................................................
Know your compact sliding compound miter saw .............
PRODUCT SPECIFICATIONS KN M-3057R
MOTOR
Power Source:
Universal 1,800 W,
120V, 50/60Hz, 15 Amp
Speed (no load): 4,000 RPM (No load)
Double insulared: Yes
Arbor shaft size:
5/8 in.
BLADE
Diameter:
12 in.
Arbor hole:
5/8 in. with 1 in. collar
WARNINGS
WARNING
Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains
chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Some examples
of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemi-
cal: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed
to fiter out microscopic particles.
SYMBOLS
WARNING ICONS
Your power tool and its Operator's Manual may contain "WARNING ICONS" (a picture symbol intended to alert you to, and/or in-
struct you how to avoid, a potentially hazardous condition). Understanding and heeding these symbols will help you operate your tool
better a. safer. Shown below are some of the symbols you may see.
SAFETY ALERT: Precautions that involve your safety.
PROHIBITION
WEAR EYE PROTECTION: Always wear safety
goggles or safety glasses with side shields.
WEAR RESPIRATORY AND HEARING PROTEC-
TION: Always wear respiratory and hearing protection.
READ AND UNDERTAND
reduce the risk of injury, user and all bystanders must
read understand
product.
MITER SAW
Miter detent stops: 0, 15, 22.5, 31.6, 45º (R & L)
Bevel positive stops: 0°, 33.9º, 45° (R & L)
CUTTING CAPACITY
Crosscut:
Miter cut 45°:
Bevel cut 45º right: 1-3/4 in. x 12-1/4 in.
Bevel cut 45º left: 2-1/2 in. x 12-1/4 in.
Compound cut 45º x 45º: 2-1/2 in. x 8-3/4 in.
Cast aluminum base: 21 in. x 13-3/4 in.
Fence heights (L & R): 4-3/4 in.
OPERATOR'S MANUAL
Operator's Manual
before using this
1
Glossary of terms ..............................................................
1
Assembly ...........................................................................
1
Setting the tool ................................................................ 11
Connecting to the power supply ....................................... 15
2
Mounting the tool .............................................................. 15
Operating the tool ............................................................. 16
4
Changing blades ............................................................... 20
Maintenance ..................................................................... 21
Parts list ............................................................................ 22
6
Diagram parts .................................................................... 24
7
Parts list and motor diagram ............................................. 25
4 in. x 12-1/4 in.
4 in. x 8-3/4 in.
KEEP HANDS AWAY FROM BLADE: Failure to keep
your hands away from the blade will result in serious
personal injury.
SUPPORT AND CLAMP WORK
DANGER: Indicates an inminently hazardous
DANGER
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous
WARNING
situation which, if not avoided, could result in dead or
serious injury.
CAUTION: Indicates a potentially hazardous
CAUTION
situation which, if not avoided, may result in minor or
moderate injury.
: To
CAUTION: Used without the safety alert symbol indi-
CAUTION
cates a potentially hazardous situation which, if not avoided,
may result in property damage.
1
WARNING
To avoid electrical
hazards, fire hazards or damage to
the tool, use proper circuit protection. This
tool is wired at the factory for 110-120 Volt
operation. It must be connected to a 110-
120 Volt / 15 Ampere time delay fuse or
circuit breaker. To avoid shock or fire, re-
place power cord immediately if it is worn,
cut or damaged in any way.
Before using your tool, it is critical that you
read and understand these safety rules.
Failure to follow these rules could result in
serious injury to you or damage to the tool.
8
9

Publicidad

loading