S e t t i n g s
Bluetooth settings
To define how your phone is shown to other Bluetooth devices, select
Settings
>
Connectivity
If you are concerned about security, turn off the Bluetooth function, or set
My phone's visibility
from others with whom you agree.
Infrared
You can set up the phone to send and receive data through its infrared (IR) port
to or from a IRDA compatible phone or data device.
Do not point the IR beam at anyone's eyes or allow it to interfere with other
IR devices. Infrared devices are Class 1 laser products.
When sending or receiving data, ensure that the IR ports of the sending and
receiving devices are pointing at each other and that there are no obstructions
between the devices.
To activate or deactivate the IR port of your phone, select
Connectivity
> Infrared.
If data transfer is not started within 2 minutes after the activation of the IR port,
the connection is cancelled and must be started again.
IR connection indicator
When
is shown continuously, the IR connection is activated, and your
phone is ready to send or receive data through its IR port.
When
blinks, your phone is trying to connect to the other device,
or a connection has been lost.
Packet data
General packet radio service (GPRS) is a network service that allows mobile
phones to send and receive data over an Internet protocol (IP)-based network.
To define how to use the service, select
Packet data
>
Packet data conn.
When needed
— to set the packet data connection to established when an application
needs it. The connection will be closed when the application is terminated.
Always online
— to set the phone to automatically connect to a packet data
network when you switch the phone on
38
>
Bluetooth
>
My phone's visibility
to Hidden. Always accept only Bluetooth communication
Menu
and from the following options:
or
My phone's
Menu
>
>
Settings
>
Connectivity
Menu
>
name.
Settings
>
>