S e t t i n g s
Welcome note
— to write the note that is shown when the phone is switched on
Flight query
> On— The phone asks every time when it is switched on whether the
flight profile shall be used. With flight profile all radio connections are switched
off. The flight profile should be used in areas sensitive to radio emissions.
Phone updates
— to receive phone software updates from your service provider
(network service dependency). This option may not be available, depending
on your phone. See "Phone software updates," p. 44.
Operator selection
>
of the cellular networks available in your area. With
a network that has a roaming agreement with your service provider.
Help text activation
Start-up tone
>
On
■ Enhancements
This menu or the following options are shown only if the phone is or has been
connected to a compatible mobile enhancement.
Select
Menu
>
Settings
on the enhancement, from the following options:
Default profile
— to select the profile that you want to be automatically activated
when you connect to the selected enhancement
Automatic answer
— to set the phone to answer an incoming call automatically
after 5 seconds. If
Incoming call alert
answer is off.
Lights
— to set the lights permanently On. Select
on for 15 seconds after a key press.
TTY/TDD
>
Use TTY
>
or loopset settings
■ Configuration
You can configure your phone with settings that are required for certain services
to function correctly. Your service provider may also send you these settings.
See "Configuration settings service," p. 10.
Select
Menu
>
Settings
Default config. sett.
the configuration settings of the service provider as default settings, select
Options
>
Set as
default.
42
Automatic
— to set the phone to automatically select one
— to select whether the phone shows help texts
— The phone plays a tone when it is switched on.
> Enhancements. Select an enhancement, and depending
is set to
Yes
— to use the text phone settings instead of headset
>
Configuration
— to view the service providers saved in the phone. To set
Manual
Beep once
or Off, automatic
Automatic
to set the lights
and from the following options:
you can select