Publicidad
Idiomas disponibles
Idiomas disponibles
FOR INSTALLATION WITH M5
HEAD AND CENTER SECTION
In order to maintain performance over the life of the product:
1.
Before any trip, verify that lynch pins, foot bracket and castle nut are undamaged and securely locked. Additionally ensure
that the lynch pins are also securely locked in place, with little to no vertical play. The image below shows the proper
orientation of the lynch pin in relation to the foot.
2.
Every 1,000 miles, check the M16 hex bolts that connect center section to legs to insure that they are still torqued to 220 ft-
lb of torque.
3.
For general maintenance of the entire 5
sheet.
Lynch Pin
©
2018 Horizon Global America Inc.
Product Instructions
M5 FORD LEG
MAINTENANCE
th
wheel hitch assembly, please refer to the M5 head and center section instruction
Lynch Pin
(Shown Open)
Foot Bracket
Page 6 of 21
30923N
Part Number:
30923
Lynch Pin
(Shown Closed)
06/21/2022
Rev. B
08/15/2018
Rev. A
Publicidad
