Descargar Imprimir esta página

BaByliss PRO 4rtists SNAPFX FX797E Manual De Instrucciones página 8

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
ENGLISH
Please carefully read the safety
instructions before using the
appliance.
PROFESSIONAL OUTLIN-
ING TRIMMER - SNAP IN/
SNAP OUT – DUAL LITHI-
UM BATTERY SYSTEM
FX797E
Vibrations
LpA (dB(A))
OPERATING INSTRUCTIONS
READ CAREFULLY AND SAVE
THESE INSTRUCTIONS
CHARGING STAND
To charge battery, plug charging
stand into an electrical outlet.
Place a battery into either pocket
on the charging stand (or put a
battery in each pocket). The bat-
tery has electrical contacts that
touch electrical contacts in the
charging stand. The weight of the
battery unit will provide sufficient
contact. Before using your trimmer
for the first time, make sure the
battery has been fully charged.
Note that it is normal for the bat-
tery and charging stand to feel
warm to the touch when charging.
AUTOMATIC CHARGING MAN-
AGEMENT
One battery – 2.4A fast charging
Two batteries – 1.2A normal
charging
Blue/Red LED charging indica-
< 2,5 m/s²
< 70
tors
Charging – blue flashing light (1
flash/4 seconds)
Fully charged – blue light
Error – red flashing light (more
than 4 flashes/second)
1. Before using the trimmer for
the first time, charge battery
continuously for 3 hours. Maxi-
mum battery capacity will only
be reached after 3 charging and
discharging cycles.
2. Plug the charging stand into
any electrical outlet. The charging
indicator will light up blue and
start flashing to indicate that the
charging has begun. Charging
is complete after 3 hours — the
light will go from flashing blue to
a solid blue to indicate charging is
complete.
3. The charging stand may become
warm while charging. This is nor-
mal.
4. Preserving the batteries: to
maintain the optimum capacity
of the rechargeable batteries, the
batteries should be recharged for
3 hours approximately every 6
months.
5. If the charging light starts to
flash red rapidly (more than 4
flashes per second), the appli-
ance is faulty. If this happens, stop
charging by removing plug from
the outlet and contact a BaByliss-
PRO Authorized Service Center.
6. To install or remove battery from
trimmer, see Battery Removal and
Installation in this manual.
7. If the appliance is to be stored
unused for a long period, the bat-
teries should be removed.
8

Publicidad

loading