Descargar Imprimir esta página

Dantherm CALOREX V-PAC 12 Manual De Instalación página 26

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 64
OWNER/INSTALLATION MANUAL
6�0 MAINTENANCE
Cover the heat pump body when not in use.
Please clean this heat pump with household
detergents or clean water, NEVER use petroleum spirit,
thinners or any similar fuel.
Check bolts, cables and connections regularly.
Regularly check condensate drain hose for blockages
and clear.
Keep evaporator clean and free from blockages with a
soft brush.To access the evaporator first isolate the heat
pump electrically using the mains isolator switch and
wait 3 minutes before removing any panels.
Warning : Care must be taken not to touch the
evaporator fins with your hands as the edges are sharp
and may cause injury.
Repair, service and disposal of redundant heat pumps
must be completed by authorised technicians. It is
illegal to allow refrigerant gases to escape to air.
Do not attempt to work on the equipment by yourself.
Improper operation may cause danger.
26
Isolate the power
supply of the
heat pump and
wait 3 Minutes
before cleaning,
examination or
repair�
7�0 TROUBLE SHOOTING COMMON FAULTS
Requirements for service personnel
Any person who is involved with working on or
breaking into a refrigerant circuit should hold a current
valid certificate from an industry-accredited assessment
authority, F-Gas registered.
Do not attempt to work on the equipment by
yourself�
1005759 ISSUE 5

Publicidad

loading

Este manual también es adecuado para:

Calorex v-pac 16Calorex v-pac 22