Skil 9295 Manual Del Propietário página 15

To Remove Backing Pad And Sanding Disc
Disconnect tool from power source. Using the lock nut wrench unscrew the nut from the spin-
dle, while holding spindle lock in.
Wire Brush Assembly
Before assembling wire brush to this tool, disconnect from the power source. Wire brushes
are equipped with their own threaded hub, simply thread on to spindle. Be sure to seat against
shoulder before turning tool "ON".
TO REMOVE: Reverse procedure.
WARNING
Wire Wheel Assembly
Before assembling wire wheel to this tool, disconnect from the power source. Attach type 27
guard (Fig. 2). Wire wheels are equipped with their own threaded hub, simply thread on to
spindle. Be sure to seat against shoulder before turning tool "ON".
TO REMOVE: Reverse procedure.
Always use type 27 guard system with wire wheels and assure that
wires fit within guard.
15