Taurus SELENE COMPACT Manual De Instrucciones página 5

English
Kettle
SELENE COMPACT
DESCRIPTION
A Handle
B ON/OFF switch
C Base
D Cable storage
E Water level indicator
F Body
G Filter
H Cover
I Cover Opening button
USE AND CARE:
- Do not switch the appliance on without water.
- Do not use the appliance if the on/off switch
does not work.
- Do not move the appliance while in use.
- Use the appliance handle/s, to catch it or move
it.
- Do not use the appliance if it is tipped up and do
not turn it over.
- Do not turn the appliance over while it is in use
or connected to the mains.
- Respect the MAX and MIN levels.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
- Do not store the appliance if it is still hot.
- The appliance is only intended for heating wa-
ter; as a consequence the appliance should not
be used for the cooking or heating of milk...
- The use of bottled mineral water adapted for
human consumption is recommended.
- Never leave the appliance connected and unat-
tended if is not in use. This saves energy and
prolongs the life of the appliance.
- Take care when handling recipients containing
liquids heated in this appliance as they may boil
fiercely.
INSTRUCTIONS FOR USE
Before use:
- Make sure that all the product's packaging has
been removed.
- Before using the product for the first time it is
advisable to boil water within, so as to remove
all remaining dust and impurities.
- Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
Filling with water:
- Remove the kettle from its base before filling it.
- Fill by lifting the lid, clicking on the button (I)
- Fill the receptacle taking care to observe the
MAX and MIN leve.
- Put the kettle on its base
- Ensure that the lid is closed
Use:
- Take the length of cable required out of the
housing.
- Attach the appliance to its base making sure
that it is correctly fitted into place.
- Connect the appliance to the mains.
- Turn the appliance on, by using the on/off
switch.
-The pilot light comes on.
- Once the water has boiled the appliance will
switch off automatically.
- The appliance can be switched on again using
the switch once the control device has cooled, if
it is not switched on again, do not force it, allow
it to cool.
Once you have finished using the appliance:
- Unplug the appliance from the mains.
- Remove the water from the inside of the
appliance.
- Put the cable back in the cable housing.
- Clean the appliance.
Cable compartment
- This appliance has a cable compartment situa-
ted on its underside.
Carry handle/s:
- This appliance has a handle on the side of the
body, which facilitates comfortable transport.