Brigmton Time Shift Manual De Instrucciones página 31

10. POWER SOURCES: This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the type of power supply to
your home, consult your product dealer or local power company. For products intended to
operate from battery power, or other sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION: This product may be equipped with a polarized
alternating-current line plug (a plug having one blade wider than the other).This plug will fit
into the power outlet only one way. This is a safety feature .If you are unable to insert the
plug fully into the outlet, try reversing the plug .If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of
the polarized plug.
12. POWER-CORD PROTECTION: Power-supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the point where they
exit from the product.
13. PERCEPTIVE ATTACHMENT PLUG: The product is equipped with an attachment
plug having overload protection. This is a safety feature. See instruction manual for
replacement or resetting of protective device. If replacement of the plug is required, be
sure the technician service has used a replacement plug specified by the manufacturer
that has the same overload protection as the original plug.
14. OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is
connected to the product, be sure the antenna or cable system is grounded so as to
provide some protection against voltage surges and built-up static charges. Article 810 of
the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding of the leadin wire to an antenna
discharge unit, size of grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for the grounding electrode:
15. LIGHTNING: For added protection for this product during a lightning storm, or when it
is left unattended and unused for long periods of time, unplug it from the wall outlet and
31