Brigmton Time Shift Manual De Instrucciones página 46

To set up your PIN code, enter Parental Lock submenu under System Setup menu
and change the current password by your new one. The PIN code by default is 0000.
To lock a channel, enter the Channel Organizer submenu under Channel Manager
menu, select a channel and press the blue button at the remote control unit. A
displayed besides the channel.
Exit the OSD menu to confirm and lock the channel. The next time you try to
access the channel, the PIN code will be asked.
6.4. Software Upgrade
Select Software Upgrade and press OK button to access the system's software
upgrading submenu.
Your TDT supports the OTA function (Over The Air), which allows you to download
updates from the DTT broadcasting, through the RF antenna input connector. You can
also install updates directly from the USB Host port of the apparatus.
IMPORTANT:
Do not turn off or disconnect the unit during the upgrading process, it may cause
irreversible damage to the system.
6.5. Factory Default
In the Digital TV menu, select Factory Default and press OK to recover the default
settings of the device when it left the factory. Enter the correct password of the parental
lock, select YES and press OK to reset all the DVB-T settings to their defaulted status.
6.6. Format Disk
In the Digital TV menu, select Format Disk and press OK to format and setup an
external USB storage device. The entire disk will formatted in FAT32 file system.
We recommend to perform this operation before start recording any TV program to
your external USB device. The device must be formatted in FAT32 file system to be
correctly detected by your TDT.
will be
46