Brigmton Time Shift Manual De Instrucciones página 49

8.3. Timeshift Function
Your TDT allows you to stop the live broadcasting and resume it from the point it
has been stopped whenever you wish, while the device is still recording thanks to the
Timeshift function. Of course you may perform fast forward and fast rewind operations too.
Connect an USB device to your TDT through the USB port and press to pause the
program you are watching. At this moment the Timeshift function will be activated and the
recording of the live broadcasting will start. Press again to resume the program from the
point you have paused it. A time bar will be displayed on the screen with the current time
and the initial recording time. Press EXIT to stop the Timeshift function and save or delete
the recording. Your TDT will recover the live broadcasting.
Timeshift during a Recording
The Timeshift function is also available while you are doing a recording, so it allows
you to rewind the recording without stopping it. Once you have pressed REC to start a
recording of the program you wish, press
without stopping the recording. At this moment the Timeshift function will be activated and
it will be indicated on the screen.
Press to stop this function and press it again to resume the program from the
point you have paused it. Press EXIT to stop the Timeshift function and return to the
recording mode.
9. COMMON INTERFACE MODULE
Your TDT is provided with a Common Interface slot at the front panel which allows
you to connect a CAM module to the unit to receive conditional access signals (as pay
DTT channel signal). Insert the CAM module into the corresponding slot with the TV
broadcaster logofacing up, as you can see in the following picture (please be sure the
CAM module is correctly inserted to avoid damaging the slot or the moldule).
Select the Common Interface option at the Main Menu of your TDT to access
several options that your CAM card supply. Press OK button over the option you wish and
select YES to confirm the opperation.
10. TROUBLE SHOOTING
The device does not turn on:
- Check the main lead is connected correctly.
No signal found:
- Maybe the antenna is disconnected or damaged. Check the antenna status.
- It is possible that you are out of digital signal area. Please, contact with the dealer.
Scrambled channel message:
- The channel is scrambled. Select an alternative channel.
when you want to pause the program
49