Brigmton Time Shift Manual De Instrucciones página 35

If this is the first time for you to use the DVB-T receiver, after pressing POWER
button at the screen will appear the Init Install menu.
ENGLISH
In the OSD Language item, you could set up the language of the on screen menus.
At the Area item you can choose your current area, where you are going to search
channels. Select the GMT Offset and turn on -if you wish to- the Summer Time mode
(automatic time update).
Once the OSD language and area are selected, press OK button and select YES
on the popup window to start channels installation. Wait a moment while the unit
completes the channels searching process. The channels founded will be stored
automatically.
4. DVB-T BASIC OPERATION
Press CH+ or CH- in your remote control unit to select a channel or just enter the
channel number with the numerical pad.
Press the button
V- or V+ to decrease or increase the volume of the DVB-T receiver. You can silence the
ound from the receiver by pressing MUTE button on the remote control unit.
4.1. Channel List
You can select the channel by using the lists you have created (see chapter 6.1.
Channel Manager). Once the list has been created, press OK to show the channels list
and press CH+ or CH- to select the one you wish. Press OK to display it.
Use V- or V+ to display the previous or next genre or press button to switch
between TV and radio channels lists. Press EXIT to close the channels list.
to switch between TV and Radio channels. Use the buttons
Install
35