Working with the hedge trimmer
Use of the machine
NOTE
►
Please note that legal restrictions in your
country may limit your use of the hedge
trimmer.
►
Inspect the hedge trimmer daily before every
use. Also check the appliance after knocks
and drops to identify any significant damage
or defects.
►
Wear sturdy shoes and snug-fitting clothing to
reduce the risk of accidents. Stand firmly on
the ground, pay attention to your balance
and always use the supplied shoulder strap!
►
For the sake of your health, take regular
breaks while working. Physical fatigue
increases the risk of injury!
WARNING!
►
Never use the appliance when you are tired
or ill or under the influence of alcohol or
other drugs or medications.
Cutting techniques
■
See fold-out page (figure A).
NOTE
►
Remove thicker branches with a branch cutter.
PTHSA 20-Li B3
Transport
■
Use the blade guard 1 when transporting
the appliance.
■
Ensure that the appliance cannot switch on
during transport.
Maintenance and cleaning
■
The motor unit must always be kept clean, dry
and free from oil or grease.
■
The hedge trimmer must be cleaned of sawdust
at regular intervals.
♦
Use a soft, dry cloth to clean the housing.
♦
Check the hedge trimmer for loose screws on
the cutter bar 2 and tighten them if necessary.
♦
Remove stuck cuttings.
♦
Maintain the cutter bar 2 using a spray oil or
an oil can.
Storage
■
Always clean the appliance thoroughly before
storing.
■
Store the appliance in the supplied blade
guard 1 in a dry place and out of the reach
of children.
■
Store the appliance horizontally or secured
against falling.
Troubleshooting:
hedge trimmer
Problem Possible cause
Motor head not
Motor
mounted correctly
will not
Battery not inserted
start.
or not charged
Troubleshooting
Check
assembly
Charge and/or
insert battery
GB │ IE
│
11
■