Yamaha Motor WaveRunner FX SVHO 2014 Guia Practica página 12

Exercise 2: Starting and stopping engine
Drill 1: Starting the engine
1. Press the unlock button 1 on the remote control transmitter to deactivate the security
system. (See the "Yamaha Security System" section in the owner's/operator's manual for
more information.)
2. Attach the engine shut-off cord 3 to your left wrist. Insert the clip 2, under the engine
shut-off switch 4. Make sure to keep the engine shut-off cord free from the handlebars
so the engine stops if the operator falls off. The clip may not pull free if the cord is
wrapped around the handlebars.
3. Push the start switch 5 (green button).
(Do not squeeze the throttle lever. The engine will not start.)
4. Release the start switch as soon as the engine starts to run.
5
–7–
4
2
3